Enclosure.

[Jeffrey Turnage]

This is what I want to make into his enclosure.

 

[Zilladragon23]

I found it! Lol That's perfect. Was it a dresser?

 

[Jeffrey Turnage]

It was a tv stand with double doors. I took the doors and shelves out. I'll hang the lights from the top. It should turn out nice. I hope.

 

[rob.kolm]

That will be great. I did something like that as well.

 

[Jeffrey Turnage]

What typ of glass did you use.

 

[Stephen Vokoun]

I used plexi glass I got from lows and it was like 4 feet by 2 for 24$

 

[Jeffrey Turnage]

This is just the start of my enclosure. Should I cut vent holes in it the front will have two glass doors. Any thoughts.

 

[Jeffrey Turnage]

Did you put vent holes in the case for air and where. And should I.

 

[Stephen Vokoun]

Did you put vent holes in the case for air and where. And should I.

I put a mesh top on my cage but I would put like 2 circle vents on each side and maybe three along the back or 1 rectangle vent on each side and two along the back. That's how I've always seen it done

 

[Jeffrey Turnage]

So I should cut vent holes. My top will be solid. I'm going to try cutting the hole in the sides and back.

 

[Stephen Vokoun]

So I should cut vent holes. My top will be solid. I'm going to try cutting the hole in the sides and back.

Yes like along the top I would just get a drill and use like a 2.5, 3 inch hole saw then you can cover them with wire mesh of find little circular vents that will fill in what ever size you cut